TAW can custom build  pump skids per your specifications or you can select our pre-designed simplex or duplex end suction or vertical multistage skids.
Using our proprietary software built into our IP66, waterproof VFDs, we do not need expensive cabinets, HMI’s, PLC’s or other external control systems to perform.
The resultant system is simpler, smaller, lighter, less expensive and more reliable. Why? MTBF reduces by the cubed of the number of components used!

Our system incorporates 1 or more VFDs (one per pump) and the screens are totally customized to your needs. Standard screens show actual pressure in PSI, set point pressure, Amperage, Speed, ETM and system errors such as cavitation, low pressure, tank low and VFD faults in readable English. No need to look up error codes in a manual.

Systems with more than one pump will automatically alternate, a pump automatically can be taken out of sequence by simply turning off the drive. Lockable power disconnects on each drive allow the pumps to be serviced without shutting down operation.
Bumpless alternation occurs after any pump runs continuously for 24 hours.

Hydraulic systems are isolated with in/out ball valves.

We utilize low noise, VFD rated check valves for long life.

All our systems feature our low flow algorithms and predictive PID fast square wave response to pressure changes.

Each drive has its own transducer, making for total redundancy.

Our drives are developed by TAW with our exclusive software including variable PWM 12-6 Khz that changes based on drive temperature.

Our systems are compact and simple to operate. No need to program anything, no keypads to fiddle with, no passwords to remember, no reason to call us.

Pressure is easily set with a potentiometer. As you adjust the pressure the screen automatically shows the set point. After 2 seconds, the screen will then alternate between set point and actual pressure in PSI.

Headers are available from 1.25″ – 4″ in schedule 80 CPVC or 304/316 stainless as shown below.

NSF (ANSI 61 low lead) certified systems are utilized for drinking water applications.

The entire TAW product line is NSF ANSI 61, ANSI 372 certified so you can buy with confidence. (Stainless headers only)

All systems are water proof (IP66) and available to 10HP, 480V, 3 phase.

Simplicity Pump Skids have a two year limited warranty. Refer to Warranty under media section.

Vertical Multistage (1-15HP)